Watson Marlow Pumps 730EnN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 82 / 132

Table 10 - Cyclic parameters
Index Name Access Type Description
48 OverCurrentError Read Bool
If set the pump has an over current
error. Please follow onscreen
instructions
49 OverVoltageError Read Bool
If set the set the pump has an over
voltage error. Please follow onscreen
instructions
50 Guard/Interlock Read Bool
If set then the guard has been opened.
Please follow onscreen instructions to
clear.
51 FlowHi-LoActive Read Bool
If set then the flow sensor low warning is
active
52 FlowLo-LoActive Read Bool If set the flow sensor low alarm is active
53 PressureHi-LoActive Read Bool If set the pressure low warning is active
54 PressureLo-LoActive Read Bool If set the pressure low alarm is active
55 FlowHi-HiActive Read Bool If set the flow high alarm is active
56 FlowLo-HiActive Read Bool If set the flow high warning is active
57 PressureHi-HiActive Read Bool If set the pressure high alarm is active
58 PressureLo-HiActive Read Bool If set the pressure high warning is active
59 FlowSensorError Read Bool
If set there is an error condition on
sensor input 1
60 PressureSensorError Read Bool
If set there is an error condition on
sensor input 2
61 AnybusNetworkMode Read Bool If set the pump is in Ethernet IP Mode
62 AnybusNetworkActive Read Bool If set Ethernet IP is active on the device
64 ErrorAcknowledge Write Bool
Used to acknowledge errors over
EtherNet IP
106 PressureSwitchError Read Bool Reports the current active batch by ID
82 m-730en-en-09 02-02-22