PIN entry on start-up
The setting
PIN entry during start-up
can be used to configure the software to choose if PIN entry is
required during start up.
This feature also means that
Auto Restart
capability is now independent of PIN code entry after start
up.
If this setting is enabled
ü
then the pump will require the PIN code to be entered before the pump
will enter the home control screen after a power cycle.
If this setting is disabled
û
then the pump will not require the PIN code to be entered before the
pump will enter the home control screen after a power cycle.
The
Auto Restart
response of the pump after a power cycle is now independent of PIN entry.
The default setting, is enabled
ü
so a PIN code will be required after a power cycle before the pump
will enter the home control screen.
Disabling this feature does not change any other aspects of PIN code operation. Anyone wishing to
modify pump settings will still need to enter the PIN code.
15.2
General settings
To view the general settings menu, select
GENERAL SETTINGS
from the main menu.
Auto restart
This pump includes a feature called
Auto Restart
. This setting only applies to pump operation in
Manual
mode.
If the pump is operating in manual mode and this feature is enabled (configured to
yes
), it will
change the way the pump responds to a power cycle.
When
Auto Restart
is enabled it will cause the pump to remember it's current operating settings
when power is lost and to resume using these as soon as power comes back on.
The
!
symbol is also displayed when the
Auto Restart
feature is enabled to warn users that the pump
has been configured in a way that could result in unexpected operation.
1.
Press
ENABLE
/
DISABLE
to turn the
Auto Restart
feature on/off (
Manual
mode).
Do not use Auto Restart for more than 12 times in 24 hours. We recommend
remote control where a high number of starts is required.
m-730en-en-09 02-02-22
53
