4.
Using the
∧
/
∨
keys, scroll to the desired value and press
SELECT
5.
Press
BACK
to store the changes and return to the
GENERIC SENSOR VALUES
screen
Scaling factor for generic sensors
Set slope adjust
The slope parameter will scale the slope of the channel as defined by the 4mA and the 20mA points.
The parameter can take a value from 0.8 to 1.2 where 1 will result in no change to the slope.
1 2
4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 20
mA
y
2
y
1
y
B
A
C
3
Figure 24 - Set slope adjust
A
Sensor configuration determined by the 4mA value and 20mA value
B
Set slope adjust is greater than 1
C
Set slope adjust is less than 1
y
1
4mA value ("Generic sensors" on page 99)
y
2
20mA value ("Generic sensors" on page 99)
m-730en-en-09 02-02-22
107
