Watlow MLS-PM, Руководство пользователя

Страница: 84 / 144

Setup
MLS User’s Guide 71
Pulse Sample Time
You can connect a digital pulse signal of up to 2 KHz to the controller’s
pulse input. Use this menu to specify the pulse sample period. Every
sample period, the number of pulses the controller receives is divided by
the sample time. The controller scales this number and uses it as the
pulse loop’s PV.
Selectable range: 1-20 seconds .
Loop Name
Use this menu to name your loop. You can choose any two characters
from the set of characters used for the input units.( See table below).
Input Units
Use this menu to choose a three-character description of the loop's
engineering units.
Selectable values: This table shows the character set for input units.
Input Character Sets for Units
thermocouples & RTDs F or C degrees
Linear and Pulse 0-9, A-Z, %, degrees, /, space
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
06 INPUT PULSE
SAMPLE TIME?
1s
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
A5 LOOP SAM-
PLE NAME?
A5
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
06 INPUT
UNITS?
º F