Watkiss Automation BookMaster, Руководство по обслуживанию

Страница: 89 / 128

Machine Inspections • TrimMaster Standard - After-Build Inspection
Watkiss BookMaster Service Manual - Issue 1 - 04/12/00
83
5.6 TrimMaster Standard - After-Build Inspection
TrimMaster Serial Number :
SECTION 1 - VISUAL CHECKS CHECKED COMMENTS / NOTES PASSED
1. Check painted surfaces
2. Check guards
SECTION 2 - ACCESSORIES CHECKED COMMENTS / NOTES PASSED
1. Check that a trim bin is installed
SECTION 3 - LABELS CHECKED COMMENTS / NOTES PASSED
1. Check that all the labels are fitted
SECTION 4 - PRE-RUN SETTING UP CHECKED COMMENTS / NOTES PASSED
1. Check all controls and settings
2. Check voltage settings
SECTION 5 - RUNNING CHECKS CHECKED COMMENTS / NOTES PASSED
1. Hand-feed 2, 4, 8, 16 and 20 sheets of A4
and check booklets
2. Run the system under the Vario with as
many bins as possible
3. Check that the Outfeed Conveyor func-
tions correctly
4. Run sets as above but in edge staple
mode (See Note)
SECTION 6 - SAFETY SWITCHES CHECKED COMMENTS / NOTES PASSED
1. Check the trim lid switch
SECTION 7 - PRE-DELIVERY CHECKS CHECKED COMMENTS / NOTES PASSED
1. Check that the machine is clean
2. Record the machine’s serial no.
3. Re-check all painted surfaces
Checks completed by : Date :
Table 5:6 TrimMaster Standard - After-Build Inspection