Required tools and materials
• Chemical-resistant, powder-free gloves
• Methanol
• Waste tubing
To install and route the waste and degasser vent tubing:
1.
Wet the barbed drain fitting located at the bottom of the solvent manager with methanol.
2.
Hold the back of the drain cup, slide the waste tubing over the barbed drain fitting, and
route the tubing to a suitable waste container.
Figure 2–1: Location of drain fitting and degasser vent tubing
1
2
3
4
Location of degasser vent tubing
Drain cup
August 8, 2016, 715005050 Rev. C
Page 26
