8
C)
1.5 Remove the top cover from the machine by placing your hands on the top of it,
pushing it backwards (step 1) and lifting it upwards (step 2) (see picture C).
You may be required to remove two screws at the back of the machine to enable
you to remove the top cover (this is dependant on the machine model)
Note: you may need to move the machine from under wall units to allow access.
This is why it is important you fit an extra 15-30cm of the flexible tubing from the
water supply when installing the unit.
Please take care not to dislodge the flexible tubing connection.
Step 1 Step 2
The carbon block
filter is closer to
the front of the
machine
2. REPLACING THE CARBON BLOCK FILTER
2.1 Insert your finger into the loop at the top of the carbon block filter (the filter that
is closer to the front of the machine) and pull it up until it is in the vertical position
(see picture D)
D)
