Waterlogic® Countertop Service Guide - Version 1, May 2015
9
E)
2.2 Remove the filter by pulling straight upwards on the filter loop (see picture E)
2.3 Insert the new carbon block filter assembly into its cradle, with the filter loop
on the left (see picture F) , which enables the filter shape to perfectly fit the cradle
profile
2.4 Push the filter firmly into place until the filter sits snugly and is flush with the
cradle top surface then lock the filter into place by closing the locking lever until it
‘clicks’ into place (see picture G)
G)
F)