Waterlogic® Countertop Service Guide - Version 1, May 2015
13
R)
4.6 Refit the UV lamp protective cover and secure it in place with the fixing screw
(see picture R)
4.7 Refit the top cover onto the machine by placing into position, making sure the
two fixing lugs at the front are lined up with the grooves (step 1) and then pulling the
cover firmly towards yourself until it clicks into place (step 2) (see picture S).
If your machine has screws holding down the top cover, screw them back in at this
stage. Hand tighten only.
4.8 Reconnect the power lead into the back of the machine and then insert the plug
into the wall socket (see picture T)
S)
Step 2
Step 1
T)
