WaterBoss 900CF, Руководство пользователя и инструкция по установке

Страница: 24 / 36

WaterBoss Filter Owner’s Manual 6/13/2012 24
Assembly and Parts, Cont.
Injector Assembly
Figure 14: Injector Assembly
Part # Description Quantity
1 93223 Injector Throat—Model 900CF 1
93223-Red Injector Throat—Models 900IF and 900NF
2 53224 Injector Nozzle with Over-Mold Gasket—Model 900CF 1
53224-Red Injector Nozzle with Over-Mold Gasket—Models 900IF and 900NF
3 93806 O-Ring 1
4 53235 Injector Cap 1
93504 Entire Assembly (all of the above parts)—Model 900CF
93504-Red Entire Assembly (all of the above parts)—Models 900IF and 900NF
93223 Injector
Throat In conjunction with the Injector Nozzle (53224) it creates the vacuum that draws the brine solution
from the brine cabinet. The center hole should be clear of debris, round, and undamaged. The
Throat should be pressed flush into the opening in the valve. If the Throat is removed, it must be
replaced with a new one.
53224 Injector
Nozzle with
Over-Mold Gasket Together with the Throat (93223) creates the vacuum that draws the brine solution from the Brine
Cabinet. The small hole in the Injector Nozzle (53224) is the one that creates the
“injection-stream” that enters the Throat. It is important that this hole is round, undamaged, and
clear of debris. If this hole becomes “clogged,” do not use anything (such as metal objects) to
clear this opening. Damage may occur. Use a clean cloth and flush with water. If necessary, a
wooden toothpick may be used. When assembling to the Valve, the Nozzle hole should line up
with the Throat. Flush screen with water to clean. The over-mold gasket seals between the
Injector Nozzle and the Injector Cap.
53235 Injector Cap Holds the injector assembly together and seals the assembly to the Main Valve Body.