Watec WAT-233 Скачать руководство пользователя

Страница: 9 / 66

3.2 Auto Iris Lens Control Settings (LENS)

Set the mode when using auto iris lens. Move the cursor to LENS with UP/DOWN key and press the ENTER and AUTO IRIS menu will be displayed.

Move the cursor up and down and adjust using LEFT / RIGHT key for the item you want to adjust.

3.2.1 Auto Iris Lens Control Mode (MODE)

Set auto iris lens control mode (MODE). Use LEFT / RIGHT key to select the lens aperture control mode.

*Default : "AUTO"

* This function will be the following control state by combining with SHUTTER/AGC of "3.3 Shutter/Gain Settings (SHUTTER/AGC)".

LENS (MODE) setting is available, but it does not work.

OPERATION

Control the lens aperture automatically.

Close the lens aperture fully.

*AUTO is recommended for standard operation.

Open the lens aperture fully.

OPEN

AUTO

LENS

OPEN

AUTO

Lens in use

MODE

OPERATION

(LENS)

LEFT/RIGHT

ENTER

Auto Iris

AUTO

MANUAL

Manual

Open the lens aperture fully.

OPEN

AUTO

Control the lens aperture automatically.

Close the lens aperture fully.

SHUTTER/AGC

OPEN

The setting is available, but it does not work. The lens aperture opens fully.

Open the lens aperture fully.

Close the lens aperture fully.

AUTO

*AUTO is recommended for using auto iris lens.

MANUAL

OPEN

AUTO

Содержание WAT-233



































































Результаты поиска

Содержание WAT-233

Отзывы:

Похожие инструкции для WAT-233

Бренды по названию

Популярные бренды

Watec WAT-233, Руководство пользователя

Результаты поиска

Содержание WAT-233

Отзывы:

Похожие инструкции для WAT-233

Бренды по названию

Популярные бренды