3.12 Motion Detection (MOTION)
Set motion detection (MOTION). The function allows conduction between A3 and B3 terminals of the I / O connector when a change on the screen is detected.
By connecting an alarm device and others between terminals, alarm output by sound or light available.
Use the UP / DOWN keys to move the cursor to MOTION and use the LEFT / RIGHT key to select ON or OFF.
*Default: OFF
When ON is selected, pressing the ENTER key will display the MOTION DET menu. Use the UP / DOWN key to move the cursor up or down and adjust
with the LEFT / RIGHT key for the item you want to adjust.
*Refer to the H/W manual for details about voltage, output current, connection of alarm devices and other between A3 and B3 terminals
of the I / O connector.
AREA SELECT
(MOTION DET MENU)
OFF
ENTER
LEFT/RIGHT
Set the motion detection area. Use the UP / DOWN / LEFT / RIGHT / ENTER key to set the area.
OPERATION
－
No operations
MOTION
*Default : the center in the screen
Set the sensitivity. Sensitivity is set in the range of 000 - 127. Increasing the set value will detect even
BLOCK DISP
DETECT SENSE
check the function.
*Default : 111
Set display/non-display of motion detection result. When ON is set, the detection result of the block
ON
where movement is detected can be output on the screen. By outputting on the screen you can visually
OFF
ON
slight changes and decreasing the set value makes difficult to detect the change.
*Default : OFF
47
