Watec WAT-233 Скачать руководство пользователя

Страница: 40 / 66

3.8.3.4 Day/Night State Output Mode (D/N STATE OUT)

Set the day/night status output mode (D/N STATE OUT). In the day/night status output mode, it is possible to conduct between the A2 and B2 terminals

of the I/O connector in conjection with the change od day/night mode. By connecting an ifrared emitter etc. between the terminals, it is possible to turn

on the infrared emitter in the night mode with the day/night function, and turn off the infrared emitter in the day mode. Use the LEFT / RIGHT keys

to select OFF, ON, DAY / NIGHT.

*Default : OFF

*Refer to the H/W manual for details about voltage / output current between the A2 and B2 terminals of the I/O connector and connection of

the infrared emitter.

3.8.3.5 Day/Night function External Control Mode (D/N EXT CTL)

Sets the Day/Night function external control mode (D/N EXT CTL). Day/Night function external control mode can switch from Day mode to Night mode by

applying voltage between A1 - B1 terminals of the I/O connector, independent of ambient illuminance. Use the LEFT / ZRIGHT ket to select ON / OFF.

*Default : OFF

AUTO

OFF

Between A2 and B2 terminals is open.

DAY/NIGHT

Between A2 and B2 pins is always on.

Between 2 and B2 pins, it conducts in night mode and opens in day mode.

LEFT/RIGHT

*Refer to the H/W manual for details about the voltage, current and connection etc. applied between

DAY/NIGHT

OFF

DAY/NIGHT

D/N STARE OUT

OPERATION

OFF

DAY/NIGHT

D/N EXT CTL

OPERATION

AUTO

OFF

It does not switch between day mode and night mode by external control.

Applying voltage between A1 and B1 terminals switches from day mode to night mode.

terminals A1 and B1.

Содержание WAT-233



































































Результаты поиска

Содержание WAT-233

Отзывы:

Похожие инструкции для WAT-233

Бренды по названию

Популярные бренды

Watec WAT-233, Руководство пользователя

Результаты поиска

Содержание WAT-233

Отзывы:

Похожие инструкции для WAT-233

Бренды по названию

Популярные бренды