Watec WAT-233 Скачать руководство пользователя

Страница: 37 / 66

3.8.3.3 IR Mode (IR MODE)

Set IR mode (IR MODE). In the night mode of the Day / Night function, the subject may become overly light and overexposure may occur when an infrated

light projector is used together. In IR mode, it is possible to suppress overexposure by optimizing exposure control in night mode. Use the LEFT / RIGHT

key to select ON or OFF.

*Default : OFF

When ON is selected, pressibng ENTER key will display the IR MODE menu. Use the LEFT / RIGHT keys to set each item.

*This function can not be used with WDR of "3.6.1 Wide Dynamic Range (WDR)". When WDR is ON, the following seetings are made.

IR MODE

－

Regardless of the set value, IR MODE is invalid and the set value can not be changed.

The notation on OSD is "-".

(WDR/BLC)

OPERATION

WDR

OFF

ON/OFF

Normal setting is possible.

Set the effective area for exposure control. For setting the effective area, select either

AUTO: (Hisogram integration mode) Perform exposure control that does not depend on

IR MODE

the effective area.

IR mode control is not performed.

LEFT/RIGHT

DAY/NIGHT

OFF

(IR MODE MENU)

－

OPERATION

AUTO

AUTO or CENTER.

AREA

LEVEL

*Default : 015

influenced is performed even when there is a high-brightness subject other than

OFF: Disables the wide dynamic range function.

improved.

WDR

Adjust the brightness during IR mode control.

*Default : AUTO

*Default : OFF

mode. By using the wide dynamic range function together, visibility can be further

OFF

the position of the subject.

ON: Links to IR mode and automatically activates the wide dynamic range function in night

CENTER: (Fixed frame emphasis mode) The effective area can be set arbitrarily. In order to

Set the wide dynamic range function.

ENTER

suppress overexposure in the set effective area, exposure control that is not easily

Brightness can be set in the range of 000 (dark) - 031 (bright).

Содержание WAT-233



































































Результаты поиска

Содержание WAT-233

Отзывы:

Похожие инструкции для WAT-233

Бренды по названию

Популярные бренды

Watec WAT-233, Руководство пользователя

Результаты поиска

Содержание WAT-233

Отзывы:

Похожие инструкции для WAT-233

Бренды по названию

Популярные бренды