Watec WAT-233 Скачать руководство пользователя страница 10

Страница: 10 / 66

3.2.2 Auto Iris Lens Speed Control (SPEED)

Set the diaphragm control speed of auto iris lens (SPEED). Use LEFT/RIGHT key to adjust the control speed of the lens diaphragm by moving the cursor.

*Default : 55

○

Auto iris lens adjustment procedure

When installing the DC iris lens, adjust the lens apperture according to the following procedure.

Please note, for DC iris lens and video iris lens, adjustment method is different each other.

○

DC iris lens adjustment procedure

The procedure for adjusting the DC iris lens is as follows.

(1) Mount the DC iris lens to the WAT-233.

(2) Set the OSD settings as follows;

　・

Set "3.3 Shutter/Gain Settings (SHUTTER/AGC)" setting to AUTO.

　・

Set "3.3.1.1 Shutter Speed (SHUT)" setting to 1/60s.

(3) When hunting occurs in which the screen continually brightens or darkens in the actual

usage environment, proceed to step(4). When you get the image properly please proceed to step(5).

(4) When hunting occurs, the control speed of the lens aperture might be too fast, reduce

the set value of "3.2.2 Auto Iris Lens Speed Control (SPEED)" until hunting stops.

(5) Adjust the lens aperture. Adjust the lens aperture with "3.3.1.2 Brightness Setting (BRIGHTNESS)".

While checking the monitor, adjust "3.3.1.2 Brightness Setting (BRIGHTNESS)" to have the optimum

brightness image.

(6) The adjustment is completed. Save the setting.

(1)Mount the DC iris lens

(4) Lens Aperture Control

Speed Setting

(2) Camera

Configuration

(3) Hunting

(6) Adjustment

Completed

SPEED

OPERATION

000-255

*When the set value is too large, the control speed will be faster, but it will cause hunting and overshoot.

And please note that when the set value is too small, the operation will be delayed and it may stop.

(5)Lens Aperture

Setting

speed.

The smaller the set value, the slower the control speed, and the larger the set value, the faster the control

Содержание WAT-233



































































Результаты поиска

Содержание WAT-233

Отзывы:

Бренды по названию

Популярные бренды

Watec WAT-233, Руководство пользователя

Результаты поиска

Содержание WAT-233

Отзывы:

Бренды по названию

Популярные бренды