Wassp WMB-X230, Руководство по установке

Страница: 3 / 18

Page 4 of 34 Page 5 of 34 Doc: Transducer Installation
Version: 2.6 May 2021
Doc: Transducer Installation
Version: 2.6 May 2021
wassp.com wassp.com
TRANSDUCER INSTALLATION MANUAL TRANSDUCER INSTALLATION MANUAL
CONTENTS
1 Introduction 6
2 Transducer Dimensions 7
2.1. 160kHz Transducer 7
2.2. 80kHz Transducer 8
2.3. Wideband Fairing Transducer 90-190kHz 9
3 Mounting Options 10
3.1. Through Hull Mounting 10
3.2. Pole Mounting 11
4 Hull Mounting Considerations 12
5 Mounting Assembly 14
5.1. 160kHz Transducer Mounting 14
5.2. 80kHz Transducer Mounting Assembly 16
5.3. Wideband Fairing Transducer 90-190kHz MOUNTING 19
6 WASSP Wideband Fairing Transducer 90-190kHz Installation 20
6.1. Measure and preparation 21
6.2. Mounting the fairing 22
6.3. Fairing Installation 23
6.4. TRANSDUCER Installation 24
7 Cable Installation 25
7.1. Gland Assembly 25
7.2. Mounting the Cable Gland 25
7.3. Transducer Cable 28
7.3.1. Replacing / Repairing an RJ-45 Connector 29
8 Cable Connection to DRX 30
9 Technical Specification 32
10 Product Registration, Support and Resources 32
FIGURES
Figure 1. 160kHz Transducer Dimensions 7
Figure 2. 80kHz Transducer Dimensions 8
Figure 3. Wideband Fairing Transducer 90-190kHz Dimensions 9
Figure 4. Through Hull Transducer Mounting 10
Figure 5. Positioning the Transducer on the Vessel Hull 10
Figure 6. Pole Transducer Mounting 11
Figure 7. Transducer mounting locations for larger displacement hulls 13
Figure 8. Alloy / Plastic Gland Assembly Outline and Dimensions 25
Figure 9. Steel Gland Assembly Outline and Dimensions 25
Figure 10. Mounting the Gland Assembly 26
Figure 11. Gland nut travel measurement point for acetal and aluminium glands 27
Figure 12. Gland nut travel measurement point for steel glands 27
Figure 13. Gland Assembly - Cable Connectors 28
Figure 14. DRX with the Transducer Receive Discharge cover label instruction 30
Figure 15. Ceramic Discharge Module 30
Figure 16. Discharging Transducer Channels 31