Wassp WMB-X230, Руководство по установке

Страница: 5 / 18

Page 8 of 34 Page 9 of 34 Doc: Transducer Installation
Version: 2.6 May 2021
Doc: Transducer Installation
Version: 2.6 May 2021
wassp.com wassp.com
TRANSDUCER INSTALLATION MANUAL TRANSDUCER INSTALLATION MANUAL
2.2. 80KHZ TRANSDUCER
Figure 2. 80kHz Transducer Dimensions
2.3. WIDEBAND FAIRING TRANSDUCER 90-190KHZ
15.40 32.70
392
A
A
524
176.50
110.50
166.50
85.50
52
SECTION A-A
REV.
DESCRIPTION
DATE
UPDATED BY
CHECKED BY
01
INITIAL RELEASE
30-01-2020
ALEXANDRA OETZEL
CRAIG SHANNON
GENERAL TOLERANCES UNLESS OTHERWISE SPECIFIED (MEDIUM)
≤3
>3-6
>6-30
>30-120
>120-400
>400-1000
>1000-2000
0.1
0.1
0.2
0.3
0.5
0.8
1.2
1.0
GENERAL TOLERANCES UNLESS OTHERWISE SPECIFIED (FINE)
≤3
>3-6
>6-30
>30-120
>120-400
>400-1000
>1000-2000
0.05
0.05
0.1
0.15
0.2
0.3
0.5
0.5
GENERAL TOLERANCES UNLESS OTHERWISE SPECIFIED (COARSE)
≤3
>3-6
>6-30
>30-120
>120-400
>400-1000
>1000-2000
0.2
0.3
0.5
0.8
1.2
2.0
3.0
2.0
F
E
4
2
1
7
5
3
8
6
B
C
D A
1 OF 1
A3
CHECKED BY
DESCRIPTION
PART NUMBER
REVISION
DRAWN BY
As Parts
MATERIAL
Transducer ASM
SHEET
SIZE
DATE
200691
30-01-2020
Alexandra Oetzel
Craig Shannon
B
C D
E F
A
1
8
6
7
5
4
3
2
GENERAL NOTES:
PART MUST BE CLEAN WITH NO SINKS, FLASH, SHARP EDGES OR BURRS.
1.
ALL DIMENSIONS ARE IN MILLIMETRES UNLESS OTHERWISE SPECIFIED.
2.
ALL DIMENSIONS AND TOLERANCES TO APPLY AFTER FINAL TEXTURING
3.
AND SURFACE FINISHING. REFER TO CAD DATA FILE (200691.IGES/.STEP/.X_T) FOR MISSING
4.
DIMENSIONS. UNLESS OTHERWISE STATED, ONLY USE RoHS COMPLIANT MATERIAL.
5.
This document contains confidential and proprietary information
and rights that belongs to Electronic Navigation Ltd. Using, o
r permitting the use of, any of the information
contained herein, copying or imaging all or part of this docume
nt by any means, or permitting any such copying or imaging, or
disclosing, or permitting the disclosure of,
any of its content to third parties is strictly forbidden witho
ut express written consent of Electronic Navigation Ltd. ©2019
Copyright Electronic Navigation Ltd.
CLIENT
Electronic Navigation
FINISH
As Parts
COLOUR
As Parts
IF YOU OVERRIDE DIMESNIONS OR LINKS PLEASE MAKE A NOTE OF THIS
OFF SHEET
STANDARD DRAWING NOTES (DELETE/ADD AS NEEDED):
PLASTIC PARTS: SHEET METAL PARTS:
NOTES UNLESS OTHERWISE SPECIFIED:
NOMINAL DRAFT ANGLE: XX°
1.
NOMINAL WALL THICKNESS: XXmm
2.
ALLOWABLE FLASH: ±X.XXmm
3.
TRIM GATE: ±X.XXmm
4.
EJECTOR MARKS: ±X.XXmm
5.
CORNERS MOUDLED SHARP: RX.X MAX
6.
PART IDENTIFICATION:
7.
a. MOLD CAVITY NUMBER: 0.15mm RAISED b. PART NUMBER: 0.15mm RAISED c. PLASTIC GENERIC IDENTIFIER THIS AREA:
i. “PC/ABS”, FONT: ARIAL, 3mm HEIGHT, 0.15mm RAISED ii. SPI ‘TRIANGULAR’ RESIN IDENTIFICATION CODE: 1… 7
d. DATE WHEEL FOR MONTH / YEAR
MACHINED PARTS:
NOTES UNLESS OTHERWISE SPECIFIED: 1. NOTES UNLESS OTHERWISE SPECIFIED: 1.
NOTES UNLESS OTHERWISE SPECIFIED: 1.
ASSEMBLIES:
Figure 3. Wideband Fairing Transducer 90-190kHz Dimensions