Wassp WMB-X230, Руководство по установке

Страница: 17 / 18

Page 32 of 34 Doc: Transducer Installation
Version: 2.6 May 2021
wassp.com
TRANSDUCER INSTALLATION MANUAL
9 TECHNICAL SPECIFICATION
The table below gives nominal mechanical and performance specifications for WASSP
Transducers.
160KHZ TRANSDUCER Wideband Fairing
Transducer 90-190kHz 80KHZ TRANSDUCER
Mechanical
Weight 12 (10m cable) 14.5 (10m cable) 29 (20m cable)
Height [mm] 94 85.5 130
Width [mm] 163 166.5 336
Length [mm] 326 524 527
Performance
Swath Width 120° 120° 120°
Beamwidth Fore Aft 3.2° 3.2° 3.2°
Beamwidth Port
Starboard 4.4° 4.4° 4.4°
TVR 159 dB 159 dB 159 dB
RVR -194 dB -194 dB -194 dB
Cable Gland Assembly
Static Pressure 6bar* 6bar* 6bar*
*Require installation as per instructions in manual
Table 1. Technical Specification
10 PRODUCT REGISTRATION, SUPPORT AND
RESOURCES
TECHNICAL SUPPORT
If you require maintenance and/or repair contact your local dealer. A list of WASSP
dealers and distributors is available at
wassp.com.
DRX technical support is available directly through:
»
Email: support@wassp.com
»
Online: http://wassp.com/support/ and click on ‘Request Support’
LATEST RESOURCES
»
For the latest version of manuals: http://wassp.com/manuals/
»
For software updates and release notes: http://wassp.com/software-updates/
»
For system drawings, mechanical drawings and declarations of conformity:
http://wassp.com/dealer-resource