![Wassp WMB-X230 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/wassp/wmb-x230/wmb-x230_installation-manual_3495810012.webp)
Page 22 of 34
Page 23 of 34
Doc: Transducer Installation
Version: 2.6 May 2021
Doc: Transducer Installation
Version: 2.6 May 2021
TRANSDUCER INSTALLATION MANUAL
TRANSDUCER INSTALLATION MANUAL
6.2. MOUNTING THE FAIRING
Drilling holes and final check before installation:
1.
Hold the fairing against the hull and check the following
- The location of the threaded rod hole marks is correct (marked in step 5 of
“Measure and Preparation”)
- The location of the gland hole is at least 5cm away from the edge of the gland
cavity area.
- The distance between the two threaded rod holes is 392m.
2.
Drill the holes for the threaded rods.
3.
Place a nut 82mm above the transducer end of
the threaded rod and add a washer at the fairing
end. 82mm of thread is required to hold the
transducer (see 6.4)
4.
Hold the fairing against the hull and push the long
end of the threaded rods up through the fairing
and hull all the way to the washer and nut.
5.
Place the backing block over the gland.
6.
Place a washer and two nuts on the threaded rods
inside the boat to secure the backing block.
7.
Take the fairing and backing block off.
Mount the WASSP gland step 1 till 6 from chapter 7.2
6.3. FAIRING INSTALLATION
1. Apply a thick layer of marine sealant to:
a. The surface of the fairing that will be in contact with the hull.
b. The surface of the backing block that will be in contact with the hull.
c. The threaded rods
2. Again, place a washer and nut back above 82mm on the threaded rods.
3. Hold the fairing against the hull and push long end of the threaded rods through the
fairing and hull
4. Place the backing block over the gland.
5. Place a washer and two nuts on the threaded rods inside the boat to secure the
backing block not exceeding 30N-m. (make sure the length of the threaded rod under
the fairing is 82mm to the nut).
A
A
A
THREADED ROD (2)
BACKING BLOCK
HULL
FAIRING
CABLE GLAND
BOW
MARINE SEALANT ON
WASHERS (2), BACKING
BLOCK, RODS (2)
MARINE SEALANT
ON FAIRING,
RECESS
Содержание WMB-X230
Страница 1: ...TRANSDUCER INSTALLATION MANUAL V2 6...
Страница 18: ......