Page 2 of 34
Page 3 of 34
Doc: Transducer Installation
Version: 2.6 May 2021
Doc: Transducer Installation
Version: 2.6 May 2021
TRANSDUCER INSTALLATION MANUAL
TRANSDUCER INSTALLATION MANUAL
SUPPORT INFORMATION
For details on Registration, Support and Resources
see "10 Product Registration, Support
WARNINGS, CAUTIONS AND NOTES
Warnings, cautions and notes are indicated by the following icons throughout this
manual:
WARNING indicates that if the instruction is not heeded, the action may result
in loss of life or serious injury.
CAUTION indicates that if the instruction is not heeded, the action may result
in equipment damage or software corruption.
NOTE indicates a TIP or additional information that can be helpful while
performing a procedure.
WASSP TRANSDUCER
INSTALLATION MANUAL
This installation manual covers the installation recommendations for the WASSP 160kHz,
WASSP 80kHz and WASSP Wideband Fairing Transducer 90-190kHz.
This manual does not cover installation and setup of any associated WASSP system
components.
DOCUMENT REVISION HISTORY
REVISION DATE
REASON FOR CHANGE
VERSION
April 2016
Compilation
1.0
June 2016
Added Technical Specification and updates
1.1
June 2017
Corrected typos in Figures 3 & 4 and Section 4
1.2
July 2017
Update Section 5.2 Mounting the Cable Gland
2.0
August 2017
Addition of Ceramic Discharge Procedure
2.1
December 2017
Update Section 8 Technical Specifications
2.2
May 2019
Update Section 7 Cable Connection to DRX
2.3
February 2020
Added Section 6 Fairing Installation
2.4
May 2020
Update Wideband Fairing Transducer 90-190kHz
2.5
May 2021
Update Dimensions setion 2.1, 2.2 and 7.1
2.6
RELATED DOCUMENTS
»
WMB-X230 Installation Manual
»
WMB-3250 Installation Manual
»
WASSP DRX Installation Manual
Further documentation and updated specifications and installation manuals can be found
at
GENERAL NOTICES
WASSP Ltd. reserves the right to change the contents of this manual and any system
specifications without notice.
Contact WASSP Ltd. regarding copying or reproducing this manual.
SAFETY NOTICES
The installer of the equipment is solely responsible for the correct installation of the
equipment. WASSP Ltd. holds no responsibility for any damage associated with incorrect
installation.
Содержание WMB-X230
Страница 1: ...TRANSDUCER INSTALLATION MANUAL V2 6...
Страница 18: ......
