Page 8 of 102
Page 9 of 102
Doc: DRX Installation
Version: 7.1 January 2021
Doc: DRX Installation
Version: 7.1 January 2021
DRX INSTALLATION MANUAL
DRX INSTALLATION MANUAL
1 INTRODUCTION
The WASSP DRX is a ‘Black Box’ smart transceiver that interfaces to devices and sensors
to make up the WASSP Multibeam Sounder System.
The system can be configured to operate in various modes, typically using a wide-angle
sonar transducer to profile the water column and seafloor in high resolution.
Using appropriate sensors, the DRX can be configured to be suitable for operations such
as commercial fishing, sport fishing, survey and mapping, exploration, search and rescue
and many more.
Actual data types output to client applications, such as WASSP CDX, will be determined
by:
»
Data types enabled in DRX, as determined by the licensing model.
»
Data types the client application supports and queries for.
»
If the client application is using raw, processed or post processed data .
»
Data types that are supported will increase through continual product development
and DRX upgrades.
The DRX functionality is defined by the software installed, the data types enabled,
the transducer connected, and the physical DRX model. The physical DRX model is
supported in 4 configurations:
»
WSP-603-200; DRX-25 wideband model (no longer available).
»
WSP-603-200; DRX-32 wideband model used with S3 and F3 products.
»
WSP-603-205; DRX-32 wideband model with IP67 rating.
»
WSP-603-250: DRX-46 wideband model used with F3X.
The same software package is applicable to all models.
For specification details on each model
see “10 Technical Specifications” on page 75
.
NOTE: DRX Serial numbers below #70 are model DRX-25.
DRX Serial numbers #70 and above are DRX-32.
DRX Serial numbers #10001 and above are DRX-46
YOUR NOTES
