Page 36 of 102
Page 37 of 102
Doc: DRX Installation
Version: 7.1 January 2021
Doc: DRX Installation
Version: 7.1 January 2021
DRX INSTALLATION MANUAL
DRX INSTALLATION MANUAL
5.2. COMMISSIONING STEP 2: SENSOR CONFIGURATION
The Configuration section of the
DRX SETUP WEBPAGES
is used for configuring the DRX
physical ports and the sensors connected to the DRX.
Launching the
DRX SYSTEM WEBPAGE
“3.6. Display and Control Devices”
5.2.1. Presets Tab
The
PRESETS
tab allows a selection of preconfigured sensor setup options and the ability
to save and retrieve custom or user defined preset options.
5.2.1.1. Applying Presets
1.
Select the required
preset from the
dropdown of
AVAILABLE PRESETS.
2.
Select
LOAD
to apply
the chosen preset.
3.
Presets will be loaded
and set
PORT SETUP,
SENSOR, DATA SETUP,
CORRECTIONS
.
PPS
configuration.
NOTE: Sensor Offsets still need to be manually setup.
NOTE: Available Presets will consist of defaults loaded into the DRX and any
custom presets applied by the user.
Preset options include:
»
Widescan Sensor Package – V103 With Spatial; Sensor package supplied as optional
kit. Reference Sensor Box Installation Manual for details.
»
Widescan Sensor Package – V103 With WSP-038; Sensor Package available from
WASSP Ltd. Configures as WSP-038 on
RS232
Port and V103 on
RS422
Port with
PPS configures.
»
SC-30 Standalone; Configuration for customer supply SC-30 used for Position,
heading and attitude data. Configure with SC-30 on
0183
port.
These presets may change depending on version and model.
NOTE: Presets will configure
PORT SETUP, SENSOR, DATA SETUP,
CORRECTIONS, PPS.
5.2.1.2. Saving Custom Presets
To save current configuration as a Preset:
1.
Enter a name for the
Preset under
SAVE
CURRENT PRESET.
2.
Select
STORE PRESET
IN DRX
.
The preset will be stored in the DRX.
5.2.1.3. Downloading and Uploading Presets
Custom configurations can be stored externally to the DRX.
1.
Select a custom preset from the Available Presets
2.
Select
DOWNLOAD
and store in your
preferred location.
Custom configurations stored externally can be uploaded to the DRX
1.
Select
BROWSE
and
select the appropriate
preset file.
2.
Select
UPLOAD
or
UPLOAD
AND
USE.
3.
The preset will now appear under Available Presets as a custom preset.
NOTE: Only upload presets that were downloaded from the DRX.
5.2.2. Port Setup Tab
The
PORT SETUP
tab is used for configuring the physical DRX ports to receive data from
the sensors attached to that port.
NMEA 0183 port can also be used to transmit data and uses the same configuration as
receive.
