Wascomat WS3 230 H, Инструкция по эксплуатации

Страница: 71 / 178

Notice Date Page
01201055
INSTRUCTION
HANDBOOK
1298 7
11
Use the numeric key to
enter the program number.
Press SELECT.
If you have entered a wrong number…
Enter the correct number to overstrike the earlier one.
Note: you must always enter three digits, even when
the number is really only a one or two-digits number.
Examples :
The program number required is 9. Enter 009 to
overstrike all digits in the wrong number.
The program number required is 19. Enter 019 to
overstrike all digits in the wrong number.
3581
If you have a memory card in
the program control unit, and
the program you selected is
both on the memory card and
in the PCU, you will be asked
"FROM PCS OR SMC ?".
Press PCS if you want to
take the program from the
PCU.
Press SMC if you want to
take the program from the
memory card.
Memory cards
A memory card is a plastic card, the size of a credit
card, with an electronic memory chip inside it. This
card is capable of storing 10 to 15 wash programs of
normal size. If the programs are mostly small ones,
more of them can be stored, whereas larger programs
will reduce the number which can be held by the card.
Memory cards of this type can be used to :
•
transfer wash programs from one washer extractor
to another
•
run wash programs straight from the card
•
transfer wash programs from a PC to a memory
card and from a memory card to a PC (these
procedures, and how to write a wash program on a
PC, are described elsewhere).
Memory cards are described in detail in the section
entitled "The Memory card".
4031
Here you can select pro-
grams from the program li-
braries. See the section entit-
led "To start a wash program
from the program library".
Displayed here will be the
number of the most frequent-
ly used program. S993 would
indicate the number of a pro-
gram on a memory card.
Press this key if you want
to select program.
In some of the text shown on
the display, Clarus Control is
referred to as PCS and the
memory card is referred to as
SMC.
11. Machine
operation
RUN A WASH PROGRAM
RUN A WASH PROGRAM