36
End of a sterilization cycle
End of a sterilization cycle
End of a sterilization cycle
End of a sterilization cycle
When a cycle is successfully finished, the “CYCLE COMPLETED” message appears on
the screen and the “Unlock door” option is preceded by the cursor.
At this stage you can press DOWN or UP until the INFO option appears; confirm INFO to access cycle parameters
for mechanical sterilization monitoring (see previous pages).
This is only possible prior to unlocking the chamber door.
If an alarm message appears at the end of the cycle, consult Chapter 8
(Troubleshooting) of the Instructions for Use and, if the problem persists, call for
technical service.
Remove the load from the chamber.
WARNING! THE LOAD AND THE STERILIZER ARE HOT!
WARNING! THE LOAD AND THE STERILIZER ARE HOT!
WARNING! THE LOAD AND THE STERILIZER ARE HOT!
WARNING! THE LOAD AND THE STERILIZER ARE HOT!
Use the tray holder (or cassette holder) to remove the load!
Do not touch the chamber, the inner porthole and the internal
fittings as long as they are hot.
Confirm (OK) to unlock the door (the cursor near the “padlock” icon disappears).
Wait the door to unlock, then open the chamber door.
Содержание LINA MB17
Страница 72: ...YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO YES NO...
Страница 73: ...Notes Notes Notes Notes...
Страница 74: ......
