walser Walimex Pro Operator USB Plus, Инструкция по эксплуатации, Страница: 11 / 24

20 21
3. Button for adjustment light / AF-focussing light ( LAMP )
Press this button to switch the adjustment light or the AF-focus -
sing light on or off. If the adjustment light or the AF-focussing
light has been activated, the display will show the symbol
4. Arrow keys - and +
Press button - or + to reduce or increase the power ratio. For
studio flashes the power range is „OF, 5.0~10“ and for flash shoe
mounted flashes „OF, 1/128~1/1“. „OF“ means, that the flash
trigger on the flash has been deactivated.
Setting the flash parameters via remote control
With the flash trigger you can make the following settings via remote
control: Power regulation of the flash, switching the audible signal
and the adjustment light or the AF-focussing light on/off and choose
the display mode for the power regulation
1. Set the channel regulator and the power regulator on transmitter
and receiver both to the same position.
2. Connect the receiver to the remote control connection of the
flash. Then switch on the flash.
3. Set the parameters for the flash on your transmitter.
Flash triggering via remote control
1. Set the channel regulator on transmitter and receiver to the
same position.
2. Connect the receiver to the flash. Then switch on the flash.
3. Press the test button to trigger a flash.
7. Solve problems
Problem Possible cause Remedy
Camera or flash
does not trigger
Out of reach Bring devices back
into reach.
Flash is in sleep
mode
Activate the flash as
described in flash
manual
or H not
displayed in the
finder of the camera
Not correctly
connected to the
camera
Check the plug
connection of flash
shoe mount/hot shoe
Camera or flash
does not trigger
Battery too weak Replace the battery
Different channels
selected
Adjust the channel
selection between TX
and RX
NOTE
Pay attention to electromagnetic fields, which can be caused,
e.g., by radio receiver devices or radio remote devices. These can
cause malfunctions.
8. Maintenance
Cleaning
The contact with moisture or water should be avoided.
Use a microfiber cloth to remove light and stubborn dirt.
9. Accessories and options
You can find extensive accessories for your device in our webshop.