Wallenstein WP845, Руководство оператора

Страница: 33 / 72

6.10 Machine Setup
CAUTION!
Park the machine so prevailing winds blow
exhaust gases / fumes away from the operator.
W006
Use the tow vehicle to position the firewood processor at the
work area. For more information, see
Create a Safe Work Area
on page 11 .
• Select a safe work area and machine location:
-
Ground should be firm and level.
-
Area must be clear of stones, branches, or hidden
obstacles that might cause a tripping, hooking, or
snagging hazard.
-
There must be no overhead hazards such as
branches, cables, and electrical wires.
• Identify a safe split stack location. If applicable, stack
split wood on level ground. Make sure the split stack
does not interfere with safe operation of the machine.
Set up the machine :
For more information, see Fig. 30 on page 34 .
1. Chock the machine wheels to prevent movement.
2. Disconnect the machine from the tow vehicle.
For instructions, see
Disconnect from a Ball-Mount Hitch
on page 53 .
3. Adjust the trailer jack to level the machine.
For instructions, see
Lower the Trailer Jack on page 53 .
4. Unfold the lead-in and log-loader chutes.
For instructions, see
Unfold the Lead-in and Log-Loader
Chutes on page 35 .
5. Unfold the splitter chute.
For instructions, see
Unfold the Splitter Chute on page
36 .
6. Set the splitter chute to the required height.
For instructions, see
Set the Splitter Chute Height on page
36 .
7. Adjust the bracing jacks until the feet are set firmly in the
ground and they support the log-loader chute.
Make sure the bottom edge of the lead-in chute is level with
and touches the ground to avoid logs getting snagged.
8. Check the log stabilizer and chain to make sure the log
stabilizer moves freely.
The log stabilizer keeps the log from rolling freely.
9. Do one of the following:
For pivot tongue instructions, see
Turn the Pivot Tongue on
page 52 .
-
Move a wagon, trailer, or conveyor into position under
the splitter chute to collect the split wood. If required,
pivot the trailer tongue.
-
Pivot the trailer tongue to prevent it from interfering with
or being buried in the stack of split wood.
WP845 / WP875
Trailer Firewood Processor
Operating Instructions
33