Wallenstein WP845, Руководство оператора

Страница: 20 / 72

5. Controls
WARNING!
Do not operate the machine until you are
thoroughly familiar with the position and function
of the various controls. Read the operator’s
manual thoroughly. Your safety is involved!
W065
5.1 Engine Controls
CAUTION!
Before starting the engine, review the safety,
operating, and maintenance instructions in the
engine manual.
W019
5.1.1 Engine Control Panel
01827
1 2 3 4
Fig. 7 –
Engine controls
1. Throttle control
2. Choke control 3. Hour and rpm meter
4. Ignition switch
Fast
Engine speed is fast.
Slow
Engine speed is slow.
STOP
STOP
The engine is stopped.
Fuel shut-off closed
Choke open
Engine start.
Choke closed
Engine warm.
RPM and hours
The display shows the engine rpm or hours of
operation. For more information, see
Hour Meter
and RPM Display .
Run
The ignition switch is not in use. The engine
may be on or off when the ignition switch is in
the
Run position.
Start
Turn the keyed ignition switch clockwise to this
position to start the engine. When the engine
starts, release the key. The ignition switch
automatically rotates counterclockwise to the
Run position.
Before starting the engine, see Engine Operation
on page 27 .
5.1.2 Hour Meter and RPM Display
While the engine is operating, the hour meter displays the
engine revolutions per minute (rpm). When the engine is off,
the hour meter displays the total number of hours the engine
has operated since it was new. The hour meter has an internal
battery.
000.0
01311
Fig. 8 –
Hour meter
Controls
WP845 / WP875
Trailer Firewood Processor
20