Wallenstein WP845 страница 22 Скачать руководство пользователя

Страница: 22 / 72

5.2.3 Hydraulic Winch Control

CAUTION!

Stay clear of the winch rope while winching.

Injury from entanglement or rope burn could

occur!

W056

The hydraulic winch control (3) lever is on the RH side of the
operator control panel.

Unwind

Pull and hold the lever up to unwind the
winch rope. Use this control intermittently
and pull the rope out by hand to prevent
it from getting tangled inside the winch
housing.

Release the lever to stop. The lever moves to
the neutral position.

Wind

Push and hold the lever down to wind the
winch rope into the winch.

Release the lever to stop. The lever moves to
the neutral position.

01828

Fig. 11 –

Hydraulic winch control lever

5.2.4 Winch Gear Lever

The winch gear lever controls the winch drive system.

Powered

Pull the lever to the LH side (toward the
operator) to engage the winch gear with the
hydraulic motor.

The hydraulic winch control is enabled and
controls the winch operation.

Freewheel

Push the lever to the RH side (away from the
operator) to disengage the winch gear from
the hydraulic motor.

Pull out the winch rope by hand. The winch
spool turns freely, and the hydraulic winch
control is disabled.

01221

Fig. 12 –

Winch gear lever

Controls

WP845 / WP875

Trailer Firewood Processor

Содержание WP845









































































Результаты поиска

Содержание WP845

Отзывы:

Похожие инструкции для WP845

Бренды по названию

Популярные бренды

Wallenstein WP845, Руководство оператора

Результаты поиска

Содержание WP845

Отзывы:

Похожие инструкции для WP845

Бренды по названию

Популярные бренды