Wallenstein WP845, Руководство оператора

Страница: 2 / 72

1. Foreword
1.1 Introduction
Congratulations on your choice of a Wallenstein firewood
processor!
This high-quality machine is designed and manufactured to
meet the needs of a proficient timber or woodlot industry.
800 Series firewood processors include a hydraulic power
source, a winch, and a splitter. The machine is powered by a
Vanguard© 14 hp (10.3 kW) engine.
The difference between the two models is the splitting cradle
size:
Model Splitting cradle size
WP845
25" (61 cm)
WP875
36" (91 cm)
The hydraulic winch is mounted on top of the machine to winch
logs up the lead-in chute and position them for cutting. After the
operator cuts the log with a chain saw, the cut log rolls into the
splitting cradle. The operator then activates the push block to
split the cut log into firewood and push it out of the machine.
Wallenstein 800 Series firewood processors improve firewood
productivity and minimize handling, while reducing the risk of
physical strain.
Keep this manual handy for frequent reference and to pass on to
new operators or owners. Call your local Wallenstein dealer or
the distributor if you need assistance, information, or additional
copies of the manuals.
Units of measurement in Wallenstein Equipment technical
manuals are written as: US Customary (SI metric)
WARNING!
Do not attempt to start or operate the machine
without thoroughly reviewing this manual for
safe and proper operation.
Always keep this manual with the machine.
W034
Wallenstein Equipment Inc. • © 2022. All rights reserved.
No part of this work may be copied, reproduced, replaced,
distributed, published, displayed, modified, or transferred in
any form or by any means except with the prior permission of
Wallenstein Equipment Inc.
WallensteinEquipment.com
1.2 Model Configuration
WP845
Firewood processor Model number
Foreword
WP845 / WP875
Trailer Firewood Processor
2