Wallenstein BXT72S, Руководство оператора

Страница: 40 / 76

7. Transport
IMPORTANT! Equipment that is transported on a public
roadway must comply with the local laws that govern the
safety and transport of machinery.
Before taking the machine on a public roadway, make sure
that it has the necessary lighting, reflectors, and markings,
and that they are in good, working condition.
This machine includes lights, reflectors, and markings;
however, it does not have a vehicle identification number
(VIN). For the specific requirements to license the machine,
contact your local transportation authority.
7.1 Transport Safety
• Make sure that the machine is safely attached to the tow
vehicle with a retainer through the hitch.
• Always attach the safety chains between the machine and
the tow vehicle.
• Do not let people ride on the machine.
• Do not exceed a safe travel speed. Decrease your speed for
rough terrain and around corners.
• Plan your route to avoid heavy traffic.
• Do not transport or move the machine with the engine on.
• Make sure that the fuel tank cap is on and tight.
• Examine the wheel rims for damage, and torque the wheel
lug nuts to the correct specifications. For more information,
see
Lug Nut Torque on page 70 .
• Examine the tires for cuts or damage.
• Make sure that the tires are filled to the specified pressure.
For the correct tire pressure, see the tire sidewall.
• Examine the axle dust caps for leaks and damage. Replace
a dust cap that leaks or is damaged.
• Make sure that the tow vehicle has the correct size ball-
mount hitch (2 inches).
• Make sure that the trailer jack is stowed.
• Make sure that all of the guards and shields are installed
and the covers are closed.
• Remove all debris from the machine.
• After the machine is ready for transport, do a circle check
to make sure that everything is safe.
7.2 Prepare the Machine for
Transport
1. Stop the machine.
For instructions, see
Stop the Machine on page 33 .
2. Remove all material from the chipper hopper.
3. Close the chipper hopper.
For instructions, see
Close the Chipper Hopper on page
26.
4. Turn the discharge chute toward the rear of the machine to
decrease the machine width.
For instructions, see
Discharge Chute on page 24
5. Make sure that the upper rotor housing is closed, and the
fastener is installed and torqued to the correct specification.
6. Attach the machine to a tow vehicle.
For instructions, see
Connect to a Ball-Mount Hitch on
page 42 .
Transport
BXT72S
Wood Chipper
40