Wallenstein BXT72S, Руководство оператора

Страница: 24 / 76

5.3 Discharge Chute
The discharge chute directs the wood chips in the selected
direction. The discharge chute can be turned 295°. The latch-
handle pin holds the discharge chute in position.
1. Push and hold the latch handle down until the pin
disengages from the hole in the round plate.
2. Use the handle to turn the discharge chute to the position
you want.
3. Release the latch handle.
Make sure that the pin engages with a hole in the round
plate to hold the discharge chute in position.
01336
Figure 10 –
Turn the discharge chute
5.4 Deflector
The discharge chute has a deflector to direct wood chips. Use
the handle to change the position.
1. Pull the deflector handle down until the bolt disengages
from the slot.
2. Use the handle to raise or lower the deflector.
Align a slot with the bolt.
3. Push the deflector handle up to engage the bolt in the slot.
The bolt holds the deflector in position.
02208
Figure 11 –
Deflector
Controls
BXT72S
Wood Chipper
24