Wallenstein BXT72S, Руководство оператора

Страница: 70 / 76

11.3 Lug Nut Torque
WARNING!
Wheel lug nuts must be installed and kept at
the correct torque to prevent loose wheels,
broken studs, or possible separation of a
wheel from the axle.
It is an extremely important safety procedure to apply
and maintain the correct torque on lug nuts that secure
the wheel to the trailer axle. A calibrated torque wrench
is the best tool to make sure that the correct amount of
torque is applied to a fastener.
Tighten wheel lug nuts to the correct torque before
the first use and after each wheel removal. After a
wheel is installed, check and torque the lug nuts after
the first 10 miles (16 km), 25 miles (40 km), and
50 miles (80 km). Check the lug nut torque periodically
thereafter.
• Start all lug nuts onto the threads by hand.
• Tighten lug nuts in stages, following the pattern
shown below the Lug Nut Torque Specifications
table.
Lug Nut Torque Specifications
Wheel
size Units First stage Second stage Third stage
8 inch lbf•ft
N•m
12–20
16–26
30–35
39–45.5
45–55
58.5–71.5
12 inch lbf•ft
N•m
20–25
26–32.5
35–40
45.5–52
50–60
65–78
13 inch lbf•ft
N•m
20–25
26–32.5
35–40
45.5–52
50–60
65–78
14 inch lbf•ft
N•m
20–25
26–32.5
50–60
65–78
90–120
117–156
15 inch lbf•ft
N•m
20–25
26–32.5
50–60
65–78
90–120
117–156
16 inch lbf•ft
N•m
20–25
26–32.5
50–60
65–78
90–120
117–156
Lug nut torque pattern:
4 bolts 5 bolts 6 bolts 8 bolts
Specifications
BXT72S
Wood Chipper
70