Wallenstein BXT72S, Руководство оператора

Страница: 31 / 76

6.4.4 Add Oil to the Engine
IMPORTANT! For more information about engine oil, see
the engine manufacturer's manual and
Engine Oil on page
48 .
1. Check the engine oil level to make sure that the oil level is
low. For instructions, see
Check the Engine Oil Level on
page 30 .
2. Turn the oil-fill cap counterclockwise to remove it.
3. Use a clean funnel to slowly add the correct type and
amount of oil.
Do not overfill.
4. Wait a minimum of one minute.
5. Remove the funnel, and then check the engine oil level.
6. Install the oil-fill cap and make sure that it is tight.
02047
Figure 18 –
Engine oil-fill location
6.5 Engine Fuel Tank
The fuel tank is located at the front of the machine, behind the
trailer tongue.
6.5.1 Fuel Safety
WARNING!
Do not smoke or vape when you handle
fuel. Fuel vapours can explode causing
serious injury or death. Keep sparks,
fl ames, or hot components away from
fuel.
W027
WARNING!
Fuel and vapors are very fl ammable and
explosive. Fire or explosion can cause severe
burns, bodily harm, or death. Keep fuel away
from sparks, open fl ame, pilot lights, heat, and
any other source of ignition.
W116
CAUTION!
Fuel vapors are very toxic. Breathing fuel vapors
can cause irritation, illness, or unconsciousness.
Check the fuel level or add fuel to the engine
outdoors or in an area that has good air fl ow.
W117
• Engine fuel is highly flammable. Handle it carefully.
• Stop the engine and let it cool before you add fuel to the
tank.
• Do not overfill the fuel tank.
• Carefully remove any spilled fuel, and then wait until any
remaining fuel dries before you start the engine.
• After you add fuel to the tank, make sure that the fuel cap
is tight.
BXT72S
Wood Chipper
Operating Instructions
31