Wallenstein BXT72S, Руководство оператора

Страница: 19 / 76

4. Familiarization
The Wallenstein BXT52S wood chipper is designed to cut small
tree trunks or branches that are a maximum of 5" (13 cm) in
diameter into consistent size wood chips.
When wood material is put into the chipper hopper, the rotor
pulls the material into the machine and cuts it into wood chips.
The machine then blows the wood chips out the disharge chute.
A Vanguard® engine provides power to the machine.
4.1 New Operator
WARNING!
All operators must understand how to put the
machine in a safe condition before they service,
maintain, or store the machine. For instructions,
see
Safe Condition on page 9 .
It is the responsibility of the owner and the operator to read
this manual, and to train all operators before they work with
the machine. Obey all safety instructions.
Only a fully trained operator is approved to use the machine.
A person who operates the machine without the correct training
is a danger to themselves and others, and can cause property
damage.
4.2 Training
Each operator must be trained in the correct operating
procedures before using the machine. The sign-off form on
page 10 can be used to keep a training record.
1. Teach the new operator the control locations, functions,
and movement directions.
2. Put the machine in a large open area and let the new
operator learn the control functions and machine
responses.
3. After the new operator knows and is comfortable with the
machine, they can start work.
4.3 Operator Orientation
IMPORTANT! When describing controls throughout this
manual, the directions for left side, right side, front, and
rear are determined when standing at the operator controls,
facing the direction of forward machine travel.
02206
Figure 5 –
Direction of forward machine travel
BXT72S
Wood Chipper
Familiarization
19