WAGO 765-1205/100-000, Руководство по эксплуатации продукта

Страница: 7 / 134

765-1205/100-000 Provisions
Product manual | Version: 2.0.0 7
8DIO FLD EC DC 24V 2.0A
1 Provisions
This document applies to the following product:
ü
765-1205/100-000 (8 DIO FLD EC 24 VDC 2.0 A) 8-Channel Digital Input/Output;
EtherCAT; 24 V DC; 2.0 A; 8 × M12 Connection
Product detail page
ü
www.wago.com/765-1205/100-000
The product must only be installed and operated in accordance with the operating instruc-
tions. Knowledge of the operating instructions is required for proper use. You can find all
documents and information on the detailed product page.
Additional document
•
&
WAGO IO-Link Configurator
1.1 Intended Use
The product 765-1205/100-000 is used to capture and output digital field signals, e.g.,
from sensors and actuators, which have been sent or received by a higher-level con-
troller.
The product works as a decentralized input/output unit in EtherCAT networks.
• This product is intended for installation in automation technology systems.
• The product is intended for indoor and outdoor use.
• Operation of the products in industrial area is permitted.
• Operation of the product in other application areas is only permitted when correspond-
ing approvals and labeling are present.
Improper Use
Improper use of the product is not permitted. The following cases in particular constitute
improper use:
• Non-observance of the intended use
• Use without protective measures in an environment in which salt water, salt spray mist,
icing, corrosive fumes, explosive gases, direct sunlight and ionizing radiation can occur
• Use of the product in areas with special risk that require continuous fault-free operation
and in which failure of or operation of the product can result in an imminent risk to life,
limb or health or cause serious damage to property or the environment (such as the
operation of nuclear power plants, weapons systems, aircraft and motor vehicles)
Warranty and Liability
The terms set forth in the General Business and Contract Conditions for Delivery and
Service of WAGO GmbH & Co. KG and the terms for software products and products with
integrated software stated in the WAGO Software License Contract – both available at
ü
www.wago.com – shall apply. In particular, the warranty is void if:
• The product is improperly used.
• The deficiency (hardware and software configurations) is due to special instructions.
• Modifications to the hardware or software have been made by the user or third parties
that are not described in this documentation and that has contributed to the fault.