WAGO 765-1205/100-000 Скачать руководство пользователя

Страница: 28 / 134

765-1205/100-000

Functions

Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A

The measurements are performed for the module and for pin 1, pin 2 and pin 4 of each
port. The measured values can be displayed in the WAGO I/O Field Webserver or the
WAGO I/O Field app. Alternatively, an OPC UA client can read out the measured values
and display them.

In the module, the measured values are compared to limiting values. An alarm or event is
generated if a value falls above or below a limiting value (e.g., a temperature limiting
value). The module can send this alarm/event
• EtherCAT

: Send emergency telegram to the controller, or the controller can read the

diagnostic history object (Index 0x10F3),

• to the OPC UA client upon: OPC UA: event.

The OPC UA client application can use the measured values, for example to implement
load management. You can find information on load management in

5.4 Overload protection

The module has built-in overload protection and periodically measures the current, volt-
age and temperature.

If the output current, supply voltage or temperature exceeds the maximum value, the
module switches off a pin/port

5.5 Parameterization Tools

5.5.1 Overview

There are several ways to set the module’s parameters. The following table provides an
overview of the tools.

Table 26: Overview of Parameterization Tools

Tool

Description

Controller with EtherCAT

master

The

EtherCAT master

must be configured to exchange process data with the

765 Series modules.

The

WAGO_series765.xml

and

WAGO_series765_diag.xml

device descrip-

tion files contain the WAGO I/O System Field modules. The configuration soft-
ware of the EtherCAT

master imports these XML files, and the user can select

and parameterize one or more 765 Series modules.

The user loads the configuration onto the EtherCAT

master. The EtherCAT

master configures and parameterizes the 765 modules via EtherCAT

WAGO I/O Field Webserver The

WAGO I/O Field Webserver

is a Webserver that is integrated into the 765

Series module. With a Web browser, users can view the Web pages and display
and modify parameters.

WAGO App I/O Field

The

WAGO I/O Field app

is an app for mobile devices that can communicate

with a 765 Series module via Bluetooth

. With the app, the user can parameterize

the 765 Series module, read and write process data and display diagnostics.

WAGO IO-Link Configurator

WAGO IO-Link Configurator

is software for configuring the WAGO IO-Link mas-

ters and the IO-Link devices.

A distinction is made between two parts of the configuration and parameterization:

EtherCAT configuration

: select EtherCAT

module

Содержание 765-1205/100-000







































































































































Результаты поиска

Содержание 765-1205/100-000

Отзывы:

Похожие инструкции для 765-1205/100-000

Бренды по названию

Популярные бренды

WAGO 765-1205/100-000, Руководство по эксплуатации продукта

Результаты поиска

Содержание 765-1205/100-000

Отзывы:

Похожие инструкции для 765-1205/100-000

Бренды по названию

Популярные бренды