WAGO-TO-PASS® 761
Device Description
15
761-210 Telecontrol Module Compact
Manual
Version 2.0.0
3
Device Description
3.1
Scope of Delivery
The scope of delivery of the
TO-PASS
®
telecontrol module, without options,
includes only the
TO-PASS
®
telecontrol module. Suitable antennas are available
as accessories.
SIM Card
Please note that one SIM card is required to operate each
TO-PASS
®
telecontrol
module and may be obtained from typical service providers such as T-Mobile,
VODAFONE or EPlus. WAGO Kontakttechnik GmbH & Co. K.G. is prepared to
assist with the selection of the most cost-effective tariff for your application.
3.2
Use
The
TO-PASS
®
product family
is designed for wireless communication of signals
and messages. This includes:
•
compact module for the connection of signals from plants,
•
transmission,
•
preparation of values for the operator.
TO-PASS
®
telecontrol modules 761-210 may be used as:
•
fault indicator,
•
remote data request system,
•
telecontrol modules.
The system is connected in wireless mode to PCs, hand computers, Internet PCs,
mobile telephones, fax, e-mail receivers or land-line telephones. Influences to the
system are also possible.
Communication occurs using the global mobile radio network “GSM” (Global
System for Mobile Communication). A SIM card is required for the
TO-PASS
®
telecontrol module to use this network. As in the case of a mobile telephone, the
TO-PASS
®
telecontrol module requires the SIM card in order to be able to “log
on” to the network.
When generating a new configuration file, you can select the scope of functions
based on the available firmware versions, or on the required functionalities.
Differences between these are shown in the following table.
