WAGO 753-482 Скачать руководство пользователя

Страница: 74 / 102

74 Commissioning

WAGO I/O System 750

753-482 2AI 4-20mA 12 Bit S.E. HART

Manual

Version 1.2.0

Along with the installed and wired fieldbus node hardware, which includes the

PROFIBUS DP/V fieldbus coupler/controller, it is necessary to install the following

software before carrying out the operations described.

Table 37: Software Required for the Commissioning on a 750-333, -833 With Dynamic Variables

Pos. Name

Description

Item-No.:

WAGO-I/O-

CHECK

(optional)

Commissioning tool for the

WAGO-I/O-SYSTEM 750

759-302

GSD files for PROFIBUS

with installation program /

Series 750, 752 und 755

Fieldbus-specific software

(e.g., GSD files for

PROFIBUS)

750-910

Download:

www.wago.com

e.g., WAGO-I/O-

PRO

CAA

(SIMATIC Manager,…)

PLC development

environment

759-333

A PROFIBUS Coupler 750-333 or Controller 750-833 is operated on a

PROFIBUS master; e.g., on a 750-870 WAGO IPC, an S7 or another PROFIBUS

master station.

In this case, WAGO-I/O-

PRO

CAA (Item No.: 759-333), the “SIMATIC Manager”

or other IEC development tools can be used for the configuration software.

The following description of the configuration is by way of example. You will find

the exact steps for configuring your PROFIBUS system in the documentation for

the software used.

As is typical for a PROFIBUS application, set up the required operating

mode “2 AI + 1, 2, 3 or 4 HART variables per channel” using the GSD files.

You will find more detailed information on this in the section “Setting the

Operating Mode Parameters – Setting Up via GSD”.

Alternatively you can also open WAGO-I/O-

CHECK

if available. In this

case, proceed as described in the section “Operating Modes” > … >

“Setting Up using WAGO-I/O-

CHECK

”.

Start your configuration software and create your basic project.

When you have selected your PROFIBUS master, open the hardware

configurator.

Now install the WAGO GSD files.

Incorporate the device descriptions for the WAGO-I/O-SYSTEM 750

devices in the device catalog and update them.

In the next step, add a “DP master system” and set the station address of

the DP master interface.

Mark the “DP master system” and open the device catalog in order to

connect the WAGO PROFIBUS DP/V1 Coupler 750-333 or Controller

750-833 you are using to the “DP master system”.

You will find the Coupler 750-333 or Controller 750-833 in the tree structure

under:

“

PROFIBUS-DP >Other FIELD DEVICES >I/O >WAGO I/O-SYSTEM 750

”.

Change the address to the station address of the WAGO PROFIBUS

DP/V1 coupler/controller previously set on the DIP switch.

Содержание 753-482







































































































Результаты поиска

Содержание 753-482

Отзывы:

Похожие инструкции для 753-482

Бренды по названию

Популярные бренды

WAGO 753-482, Руководство пользователя

Результаты поиска

Содержание 753-482

Отзывы:

Похожие инструкции для 753-482

Бренды по названию

Популярные бренды