WAGO 753-482 Скачать руководство пользователя

Страница: 16 / 102

16 Device Description

WAGO I/O System 750

753-482 2AI 4-20mA 12 Bit S.E. HART

Manual

Version 1.2.0

Device Description

The Analog Input Module 753-482 (2AI 4-20mA 12 Bit S.E. HART) processes

analog signals with the norm value of 4 mA ... 20 mA.

The I/O module also enables digital communication to be carried out with HART-

enabled field devices (Highway Addressable Remote Transducer).

The I/O module has 2 input channels and enables field signals to be received via

the HART 1+ and HART

1−

and HART 2+ and HART 2

−

connections. Typically,

the current values are measured at these connections, but at the same time the

HART signals can also be coupled and decoupled on an alternating voltage

basis.

The channels have a common reference potential and a shield connection.

The shield connection is fed directly to the carrier rail and contact is made

automatically by snapping the module onto the rail.

The channels are not electrically isolated from one another.

Dabei

Two-conductor transducers, which do not have their own power supply, such as

adjustable resistances, pressure, flow and level meters, can be connected

directly.

The transducers are directly supplied from the I/O module.

In order to connect the 0 V line when using 3-conductor transducers, a 75x-604

or –614 Field Side Connection Module must be plugged in next to the HART I/O

module, providing the 0 V potential for the field level.

The input signal is electrically isolated and is transmitted with a resolution of

12 bits.

Simple parameterization of the HART I/O module for 6 different operating modes

enables the I/O module to be used optimally for 4 different types of application.

Table 3: Types of Application

Types of Application for the HART I/O Module

Programmable fieldbus controllers can communicate with HART devices

from IEC61131-3 programs using the “WagoLibHART_0x.lib” PLC library.

FDT tool routing to the DTM of the connected HART device is possible with

a number of WAGO ETHERNET controllers and the 759-359

ModbusTCP/HART Gateway.

Up to 4 HART dynamic variables (PV, SV, TV, QV) can be incorporated in

the cyclic process image of the 750-333 PROFIBUS Coupler or 750-833

PROFIBUS Controller by parameterization via GSD (device master data) or

WAGO-I/O-

CHECK

When using the 750-333 PROFIBUS DP/V1 Coupler or 750-833

PROFIBUS Controller and the 759-360 PROFIBUS/HART Gateway DTM,

FDT tool routing is possible to the DTM of the connected HART device.

Содержание 753-482







































































































Результаты поиска

Содержание 753-482

Отзывы:

Похожие инструкции для 753-482

Бренды по названию

Популярные бренды

WAGO 753-482, Руководство пользователя

Результаты поиска

Содержание 753-482

Отзывы:

Похожие инструкции для 753-482

Бренды по названию

Популярные бренды