WAGNER TOPFINISH DD10 Скачать руководство пользователя страница 8

Страница: 8 / 48

VERSION 12/2017

ORDER NUMBER DOC 2366672

TOPFINISCH DD10

IDENTIFICATION

3.1

EXPLOSION PROTECTION IDENTIFICATION

As defined in the Directive 2014/34/EU (ATEX), the device is suitable for use in potentially

explosive areas.
Device types:

Pneumatic double diaphragm pump

TOPFINISH DD10

Manufacturer: Wagner International AG

CH-9450 Altstätten, Switzerland

European Communities

Symbol for explosion protection

Device class II

Category 2 (Zone 1)

Ex-atmosphere gas

Ignition protection

Ignition protection for non-electrical devices

IIB

Explosion group

Maximum surface temperature < 135 °C; 275 °F (with drying protection

active)

Zone 1 high safety level

Special notes (see Chapter

3.2

)

3.2

IDENTIFICATION "X"

The maximum surface temperature corresponds to the permissible product temperature.

This and the permissible ambient temperature can be found in Chapter

5.5.2

(Technical

Data).

Safe handling of WAGNER spray devices

Mechanical sparks can form if the device comes into contact with metal.

In an explosive atmosphere:

Knocking or pushing metal against metal is to be avoided.
Do not drop the device.

Maximum surface temperature

The maximum surface temperature of the pump depends on the operating

conditions (heated product) and not on the device (frictional heat).

Ignition temperature of the coating product

Ensure that the ignition temperature of the coating product is above the maximum

surface temperature.

Ambient temperature

Permissible ambient temperature: 10 °C to 60 °C; 50 °F to 140 °F.

Surface spraying, electrostatics

Do not spray device parts using electrostatic equipment.

Содержание TOPFINISH DD10

















































Результаты поиска

Содержание TOPFINISH DD10

Отзывы:

Бренды по названию

Популярные бренды

WAGNER TOPFINISH DD10, Руководство по эксплуатации

Результаты поиска

Содержание TOPFINISH DD10

Отзывы:

Бренды по названию

Популярные бренды