WAGNER TOPFINISH DD10, Руководство по эксплуатации

Страница: 38 / 48

38
VERSION 12/2017 ORDER NUMBER DOC 2366672
TOPFINISCH DD10
11 FUNCTION TEST AFTER THE REPAIR
After all repairs, the device must be checked for safe condition before recommissioning.
The necessary scope of inspection and testing depends on the repair carried out and must
be documented by the repair staff.
Activities Aid tools
1.
EX-relevant inspections
− Check mass connection between grounding connection of the pump and
the frame/trolley and between the individual components of the frame/
trolley: <100kΩ
Ohmmeter
These inspections are − relevant!!
2. Testing for leaks
− Connect the pump to the air supply 6 bar.
To perform a leak test on the device, the product pressure with the
flushing agent is slowly increased in increments until the maximum
pressure indicated on the type plate is reached. Close pump outlet.
Allow to stand in this position for 0.5-1 minute and listen for audible
blowing off.
Close air-supply ball-valve without relieving and check for pressure-loss.
Air motor:
Test medium com-
pressed air
Leak spray
Fluid section:
Test medium: suitable
flushing agent
3. General inspections
− Check tightening torque of various screws. see Chapter . Torque wrench
Visual check
− Check all threaded connections.
− Empty device (Chapter
8.2.4 ) and depressurize it (Chapter 7.4 ).
− Check function of frame or transport trolley. Check whether the pump is
mounted
horizontally on the frame.
12 DISPOSAL
When the equipment must be scrapped, please differentiate the disposal of the waste
materials.
The following materials have been used:
Stainless steel
Aluminum
Elastomerics
Plastics
Ceramic
Consumable products
Consumable products (lacquers, adhesives, flushing and cleaning agents, solvents) must
be disposed of in accordance with all applicable legal requirements.