manualshive.com logo in svg

WAGNER TOPFINISH DD10, Руководство по эксплуатации

Поделиться
Скачать
WAGNER TOPFINISH DD10 Скачать руководство пользователя страница 28

28

VERSION 12/2017

ORDER NUMBER DOC 2366672

TOPFINISCH DD10

8 

CLEANING AND MAINTENANCE

8.1 

CLEANING

8.1.1  CLEANING STAFF

Cleaning work should be undertaken regularly and carefully by qualified and trained staff. 

They should be informed of specific hazards during their training.

The following hazards may arise during cleaning work:

− Health hazard from inhaling solvent vapors.
− Use of unsuitable cleaning tools and aids.

8.1.2  DECOMMISSIONING AND CLEANING

The device should be cleaned for maintenance purposes, etc. Ensure that no remaining 

product dries on and sticks to the device.

Procedure

1. Carry out work interruption   Chapter 

7.4

.

2. Carry out the basic flushing   Chapter 

7.5

.

3. Empty system in a controlled manner   Chapter 

8.2.4

.

4. Service spray gun in accordance to its operating instructions.
5. Clean and check the suction system and the suction filter.
6. Clean the outside of the system.

WARNING

Brittle filter pressure regulator!

The tank on the filter pressure regulator becomes brittle through contact with solvents and 

can burst. Flying parts can cause injury.

Do not clean the tank on the filter pressure regulator with solvent.

7. Fully assemble the system.
8. Fill the system with flushing agent in accordance with Chapter 

8.2.5

.

8.1.3  LONG-TERM 

STORAGE

If storing the system for a prolonged period of time, thorough cleaning and corrosion 

protection are necessary. Replace the water or solvent in the product pump with a suitable 

preserving oil.

Procedure

1. Carry out points 1 to 7 in Chapter 

8.1.2

 "Decommissioning and Cleaning".

2. Fill the system with preservative in accordance with Chapter 

8.2.5

.

3. Empty the system in a controlled manner in accordance with Chapter 

8.2.4

 and seal 

the openings.

Содержание TOPFINISH DD10

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды