manualshive.com logo in svg

WAGNER TOPFINISH DD10, Руководство по эксплуатации

Поделиться
Скачать
WAGNER TOPFINISH DD10 Скачать руководство пользователя страница 25

25

VERSION 12/2017

ORDER NUMBER DOC 2366672

TOPFINISCH DD10

7 

OPERATION

7.1 

TRAINING THE OPERATING STAFF

The operating staff must be qualified to operate the entire system.

The operating staff must be familiar with the potential risks associated with 

improper behavior as well as the necessary protective devices and measures.
Before work commences, the operating staff must receive appropriate system 

training.

7.2 

EMERGENCY STOP

In the case of unforeseen occurrences:

– Close ball valve.
– The air supply should be interrupted.

 

B_06917

open

closed

7.3 

WORK

Ensure that:

commissioning is carried out in accordance with Chapter 

6.7

.

1. Visual check:

personal safety equipment, grounding and all devices ready to use.

2. Secure spray gun and insert valve into the spray gun.
3. Slowly open the ball valve.
4. Set the required working pressure on the pressure regulator.
5. Optimize the spray pattern as laid down in the spray gun instructions.
6. Start work process.

Содержание TOPFINISH DD10

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды