manualshive.com logo in svg

WAGNER TOPFINISH DD10, Руководство по эксплуатации

Поделиться
Скачать
WAGNER TOPFINISH DD10 Скачать руководство пользователя страница 37

37

VERSION 12/2017

ORDER NUMBER DOC 2366672

TOPFINISCH DD10

10.4  CLEANING THE PARTS AFTER DISASSEMBLY

WARNING

Incompatibility of cleaning agent and working medium!

Risk of explosion and danger of poisoning by toxic gases.

Examine the compatibility of the cleaning agents and working media on the basis 

of the safety data sheets.

Please note:

Thoroughly clean all reusable parts with a suitable cleaning agent.
All uninstalled parts have to be clean and dry after cleaning. Care should be taken 

that these parts remain free of solvents, grease or sweat from the hands (salt water). 

Clean and mount wearing gloves.

10.5  ASSEMBLY OF THE DEVICE

In Chapter 

14

 the order numbers for device spare parts can be found, as well as for wearing 

parts such as seals.

Defective parts, O-rings and seal sets must always be re-placed.
Use greases and glues in accordance with Chapter 

14

.

Observe torque specifications in Chapter 

14

.

Mounting materials

Order No.

Quantity

Designation

Smaller tanks

9992590

1 pc 

≙ 

50 ml

Loctite  222

322912

1 pc 

≙ 

250 ml

Hydraulic oil - Wagner

 

Brand notice

The brands specified in this document are property of the respective owners. Loctite , for example, is a 

registered brand of Henkel.

Содержание TOPFINISH DD10

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды