WAGNER TOPFINISH DD10, Руководство по эксплуатации

Страница: 27 / 48

27
VERSION 12/2017 ORDER NUMBER DOC 2366672
TOPFINISCH DD10
7.5 BASIC CLEANING
Flush regularly
Regular flushing, cleaning and maintenance ensures the pumps' high pumping and
suction capacity.
The cleaning and flushing agents used must be compatible with the working material.
WARNING
Incompatibility of flushing / cleaning agent with the working medium!
Risk of explosion and danger of poisoning by toxic gases.
Examine the compatibility of the flushing and cleaning agents and working media
on the basis of the safety data sheets.
B_05380
2
3
4
5
7
6
8
1
Procedure
1. Visual check: personal safety equipment, grounding and all devices ready to use.
2. Place empty, grounded tank (7) under the return tube (6).
3. Place the suction hose (3) in the grounded tank with flushing agent (4).
4. Adjust the pressure regulator (1) to approx. 0.2 MPa; 2 bar; 29 psi.
Flush via the return flow valve
5. Open return valve (5).
6. Slowly open the ball valve (8).
7. Adjust the air pressure on the pressure regulator (1) so that the pump runs smoothly.
8. Flush the system until clean flushing agent flows into the tank (7).
9. Close ball valve (8).
10. As soon as there is no pressure remaining in the system, close the return valve (5).
Flush using gun
11. Point the spray gun, without nozzle, into the tank (7) and open it.
12. Slowly open the ball valve (8).
13. Flush until clean cleaning agent flows from the spray gun.
14. Close ball valve (8).
15. When there is no pressure remaining in the system, close the spray gun.
16. Secure the spray gun.
17. Dispose of the contents of the tank (7) according to the local regulations.
7.5.1 FILLING WITH WORKING MATERIAL
After basic flushing, the pump can be filled with working material. Proceed according to
Chapter 8.2.5 , but use working material instead of flushing agent.