33
VERSION 01/2018
ORDER NUMBER DOC 2385674
TOPFINISH Bell 1S
6.6
ASSEMBLY AND INSTALLATION
National regulations
Ensure that the national explosion prevention rules and regulations are observed
when setting up the device.
6.6.1 TYPICAL ELECTROSTATIC SPRAYING SYSTEM
Notice:
The TOPFINISH Bell 1S high-speed rotary atomizer must be used with various components
as a part of an electrostatic spraying system.
The air system shown in the figure is only one example of an electrostatic spraying system.
Your WAGNER retailer would be happy to assist you in creating a spraying system solution
that meets your individual needs.
The high-speed rotary atomizing system may only be commissioned by trained and skilled
specialist personnel. Ensure that the operating personnel have familiarized themselves with
the additional operating manuals and safety specifications of all the system components.
Once the installation is complete, the capacity of the entire system must be measured and
the maximum discharge energy calculated from this.
The type classification according to EN 50176 (type B-L, type C-L or type D-L) or EN 50348
(type A-NL or type B-L) can be made on the basis of these values.
The values calculated and the type classification must be documented accordingly.
A
B
C
D
B_01138
F
E
G
B_01332
Designation
A Spray booth
B Work piece
C Conveyor
D Control cabinet
E Reciprocator
F Electrostatic high rotation atomizer
G Air filter
