WAGNER EPG-Sprint X, Руководство по эксплуатации

Страница: 45 / 104

45
EPG-SPRINT X
EPG
SPRINT X
0
%
100 %
10
20
30
40
50
60
70
80
90
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
Tri
EPG
SPRINT X
0
%
100 %
10
20
30
40
50
60
70
80
90
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
Tri
P_01751
20
22
19
24
34
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2329371
7.7
SETTING AND CHANGING COATING PARAMETERS
7.7.1
SETTING THE TOTAL AIR VOLUME
To the right of the "Total Air Volume" button 20 is the "Total Air" bar graph display 34.
When the control unit is in the ready position, this light strip shows the set point as a dot
and when powder feeding is switched on it shows the actual value as a bar.
To the right of the bar graph is the scale for the total air volume. To the left of the bar graph
is another scale indicating the hose diameter. This scale shows the correlation between
the total air volume and the inner hose diameter (see operating manuals for the powder
injectors PI-F1 and HiCoat ED-Pump-F). The inner hose diameter is printed on the powder
hose.
Example:
Inner hose diameter 11 mm
Total air 4.5 m³/h
The total air volume can be adjusted between 1-6 m³/h as described above. If this value
is further reduced from a value of 1 m³/h, the word "off " appears in the LED display 19 to
signal that the total air supply is deactivated. The total air supply is not therefore activated
when the powder feed is switched on.
Procedure:
1. Press "Total Air Volume" button 20 to adjust the
total air volume. Yellow LED 22 indicates that the
total air volume is selected.
2. The total air volume can now be adjusted using the
universal rotary controller 24 between 1-6 m³/h
with a resolution of 0.05 m³/h. The value is shown
in the LED display 19.