Wacker Neuson GPi 1700, Руководство оператора

Страница: 20 / 52

Operation GPi 1700
wc_tx001234gb.fm
20
2.6 Power Requirements
Application This generator is designed to operate single-phase, 60 Hz equipment running at
120 VAC. It also provides DC power strictly intended for charging 12V automotive
style batteries.
Check the nameplate or label provided on tools and equipment to make sure their
power requirements are met by the power output of the generator. If the wattage is
not given for a particular tool or piece of equipment, contact the tool manufacturer
for wattage requirements.
NOTICE: Do not exceed the continuous rated output of the generator. Damage to
tools or generator can occur. See Technical Data .
About power
requirements Some pieces of equipment and tools require a surge of current when starting. This
means that the amount of power needed to initially start the equipment is larger
than the power required to keep it running. The generator must be capable of
supplying this "surge" current. Other equipment may require more power than is
actually stated on its nameplate.
Approximate
starting power
requirements The information in the following chart is offered only as a general guideline to help
you determine power requirements for different types of equipment. Contact your
nearest Wacker Neuson dealer, or the manufacturer or dealer of the tool or
equipment, with questions regarding power requirements.
Equipment type Wattage needed to start Comments
„
Incandescent lights
„
Appliances such as
irons and hot plates
Same wattage as is stated on
their nameplates These have resistive-
type heating ele-
ments.
„
Fluorescent and
mercury lamps 1.2–2 times their stated wattage
„
Electrical motors
„
Certain electrical tools
Depends on motor type and use
„
Most electrical tools 1.2–3 times their stated wattage
„
Submersible pumps
„
Air compressors
3–5 times their stated wattage
„
Other equipment Calculate by multiplying its
voltage and amperage
requirements Volts x Amps = Watts