Wacker Neuson GPi 1700, Руководство оператора

Страница: 19 / 52

GPi 1700 Operation
wc_tx001234gb.fm
19
2.4 Lifting and Transporting
Lifting and
carrying the
machine This generator is designed be lifted and carried by one person. However, its dry
weight of 20.5 kg (45 lbs.) is heavy enough to cause injury if proper lifting
techniques are not used. Observe the following guidelines when lifting and carrying
the generator.
„
Use only the designated carrying handle.
„
Bend at the knees, not from the waist, when lifting the generator.
Transporting
the machine Observe the following guidelines when transporting the generator to and from the
job site.
„
Drain the fuel tank before transporting the generator.
„
Ensure that the generator is securely strapped down in the transport vehicle to
prevent it from sliding or tipping.
„
Do not refuel the generator in or on the transport vehicle. Move the generator to
its operating location and then fill the fuel tank.
2.5 Installation
Locating the
generator Follow the practices below when choosing an appropriate location for the
generator.
„
Place the generator in an area where it will not be exposed to rain, snow, or
direct sunlight.
„
Position the generator on firm, level ground so that it will not slide or shift.
„
Position the engine exhaust away from areas where people may be present.
„
The surrounding area must be free from water and moisture. All components
must be protected from excessive moisture.
NOTICE: The generator has a built-in forced air cooling system, and may become
overheated if it is enclosed. Therefore, do not enclose the generator or cover it with
a box.
Ref. Description Ref. Description
a Recoil starter i OIl drain plug
b Control panel j Right side panel
c Left side panel k Oil filler / oil gauge
d Air cleaner l Spark plug cap
e Fuel drain screw m Spark arrester
f Carrying handle n Fuel filter
g Fuel tank cap cover o Rear cover
h Exhaust outlet — —