Wacker Neuson EZ17, Руководство оператора

Страница: 79 / 256

OM EZ17 us 1.0 * ez17i400.fm
4-31
4
Start the engine
NOTICE
Damage to engine if it is started again immediately after stopping it.
►
Wait at least 10 seconds before starting the engine again.
NOTICE
Damage to preheater if the preheating system is operated too long.
►
Never preheat the engine more than 3 – 5 seconds.
1. Insert the starting key.
2. Turn the starting key to position 1 .
3. All indicator lights illuminate for 2 seconds.
➥
Replace malfunctioning indicator lights immediately.
4. Turn and hold the starting key in position 2 until indicator light 30
(preheating) goes out.
➥
Charge indicator light 28 illuminates.
➥
Indicator light 29 for the engine oil pressure illuminates.
5. Turn and hold the starting key in position 3 until the engine starts.
➥
All indicator lights go out.
➥
If the engine does not start after 10 seconds:
➥
Interrupt the start procedure and repeat it after about 1 minute.
➥
If the engine still does not start after a few tries: contact a Wacker
Neuson service center for error analysis.
6. As soon as the engine runs:
7. Release the starting key as soon as the engine runs.
Information
The engine will not start unless the control lever base is raised.
Warm-up phase of machine
After the engine has started, allow it to warm up at slightly increased idling
speed until it reaches its operating temperature of about 82 °C (180 °F)
(coolant).
Do not let the machine warm up at standstill.
During the warm-up phase, check for unusual noise, exhaust color, leaks,
malfunctions or damage.
In case of malfunctions, damage or leaks: park and secure the machine,
and find out the cause for the damage and have it repaired.
Fig. 70
0
1
2
3
P
Fig. 71
29 30 28